Related Links
Quick Links
Signatone Thermal Probing Systems
Model S-1060 QuikTemp
Controlled with D3 Dark Box
Signatone manufactures Thermal Chucks (hot and cold) for a wide range of applications:
- Prober mounted or stand-alone Hot Chucks for characterizing wafers and packaged devices at temperatures ranging up to 300°C
- Very high temperature Hot Chuck Systems for up to 600°C. (see below for data)
- Prober mounted or stand-alone Hot / Cold Chuck Systems for temperature ranges from -65°C to 200°C
- -15°C to 70°C Stable Temperature Hot/Cold Fluid Chuck Systems for liquid crystal hot spot detection
- Stand-alone Dark Box Systems for engineering applications
- C/V plotter Hot Chucks Systems for production and engineering
- Ultra high temp (600°C) systems
- Triaxial Hot Chucks for low current probing
- Large area Hot Chucks for flat panel probing
Signatone S-1060R 4" Hot Chuck Data Sheet (600°C)
- Temperature Range..................Ambient to 600°C
- Temperature Accuracy..................+/- 1°C
- Temperature Resolution.........1°C
- Temperature Uniformity......................+/- 1°C
- Surface Flatness.................005" TIR across Temp Range
- Surface/Base Expansion..........Typical 0.010" across Temp Range
- Surface to Ground Isolation...106 ohms. ( 1014 ohms available with triax top )
- Surface to Ground Capacitance...................<300pF
- Electrical Noise Floor....................Approx. 10 nA
- Chuck Actual Diameter........................4.5"
- Chuck Height Q chuck......................1.25"
| Power | Width | Height | Depth |
|---|---|---|---|
| 110V/20A | |||
| 220V/10A |
Note: This system mounts in a standard 19" rack.
Note: Cooling from 600°C to 350°C is by gas, from 350°C to ambient by liquid.